Manikins - Sensor technology for the well-tempered office: HVAC is starting to sweat

Dübendorf, St. Gallen und Thun, 15.08.2024 - Thanks to sensor technology and mathematical modeling, smart dummies provide new insights into how workplaces can be brought to a comfortable temperature in an energy-efficient way and how to prevent patients from getting cold feet in the operating theater.

When the sun beats down on the facades in midsummer, the interiors of buildings with unshaded windows or poor insulation heat up mercilessly. If even the open window does not provide a cooling draught, it starts to get uncomfortable from a room temperature of 26 degrees. If the room temperature rises further, even less physically strenuous activities such as office work become a burden. Fans and air conditioning systems run hot. Switzerland is sweating.

Energy consumption for air conditioning systems in Switzerland is now in the terawatt range every year, i.e. in the order of billions of kilowatt hours. It is uncertain whether the desired cooling in the room can be achieved at all. Empa researcher Agnes Psikuta has therefore set herself the task of generating reliable data on the indoor climate in the workplace. Her goal: to air-condition buildings much more sustainably – while at the same time maintaining people's health and performance. Her work colleagues: ANDI and HVAC, smart dummies that measure the indoor climate. Thanks to sensor technology and mathematical modeling, they recognize how workplaces can be sustainably brought to a comfortable temperature.

Sweating in the virtual office

The futuristic-looking HVAC, short for Heating, Ventilation, Air Conditioning, is well equipped: However, sensors for air temperature, humidity and air movement alone are not enough. A total of 46 measuring fields break through the plastic shell of the manikin, which it uses to quantify the heat radiation from the environment and, for example, distinguish between heat from solar radiation and from the heating system.

Its partner with the simple name ANDI complements HVAC's data perfectly: "ANDI is the type for the big picture, it absorbs the heat balance that a person has under the given conditions," explains Agnes Psikuta from Empa's Biomimetic Membranes and Textiles laboratory in St. Gallen. To this end, ANDI keeps its operating temperature constant at 34 degrees, which corresponds to the skin temperature of a person in the comfort zone. Comfort zone here means that the body of a healthy adult can maintain a constant core temperature of 36.5-37.5 with minimal effort. "In the comfort zone, people don't sweat, they don't shiver from the cold and their hands and feet don't freeze because they can maintain their thermal balance with ease," says the researcher.

The mathematical modeling of this combined data ultimately results in a virtual thermal model of a person at work. In a project funded by the Swiss National Science Foundation (SNSF), Agnes Psikuta is now working with partner institutes at the EPFL and the Polish Silesian University of Technology to investigate how HVAC and ANDI cope with the parameters of real office conditions over the course of the year.

Ultimately, it should be possible to optimize the energy requirements of buildings based on this work. "At the height of summer, air conditioning systems run at full speed to completely cool open-plan offices, for example. However, it is unclear how effective the situation is for the individual workplaces," says the Empa researcher. Structural elements directly at the workplace, such as cooling wall panels or ventilated office chairs, could provide more energy-saving and efficient solutions. The same could apply to the winter heating period: HVAC and ANDI could determine whether, for example, a room temperature of 17 degrees is sufficient if the workplace is heated locally to 22 degrees.

Dangerous hypothermia

However, the two manikins are also used in completely different situations – namely on the operating table. During a surgical procedure lasting several hours, it is important that the patient's body does not cool down too much, while the surgeon must not start sweating. If the patient loses too much heat, the risk of complications increases and the chances of a swift recovery worsen. "Previous options for keeping the patient warm enough, however, have consisted of unsustainable disposable solutions or cumbersome, difficult to disinfect set-ups," says Agnes Psikuta.

In a project with the Warsaw University of Technology, HVAC and ANDI are therefore investigating how easy-to-disinfect infrared lamps should be positioned in the operating room without obstructing the complex spatial conditions during the procedure. In addition, the heat radiation must not heat up the healthcare staff or even cause skin burns on the patient. While HVAC measures the heat flow from the lamp to the body with its dense matrix of sensors, ANDI calculates the entire heat balance of a patient, including the current room temperature. "The modeled data will be used to determine the position and output of the heat lamps for a wide variety of situations," says the Empa researcher. "In this way, we hope to be able to create ideal operating conditions without the risk of hypothermia."

 

The ideal office
The climatic comfort zone at the workplace may vary from person to person. For experimental studies, Empa researchers assume a temperature of 22 degrees with 50% humidity for offices.

Legal requirements specify a range between 20.5 and 26.5 degrees for offices, depending on the outside temperature.

 

Thanks to manikins: high-tech clothing and protection for firefighters
They are called SAM, Henry or HVAC: so-called manikins that use sensors to record their environment and put their inner workings of cables and interfaces at the service of science. Smart dummies such as the sensor model Henry go through fire for us when they help to optimize new protective equipment for the fire department. The sweating manikin SAM (Sweating Agile thermal Manikin), on the other hand, can perform sporting activities such as mountaineering and, thanks to 125 water jets, simulate the perspiration of a human being. With the help of SAM, Empa researchers and their industrial partners have already developed breathable textiles with the sportswear manufacturer KJUS in Risch-Rotkreuz (ZG) or the Swiss pyjama start-up Dagsmejan.

 

 


Address for enquiries

Dr. Agnes Psikuta
Biomimetic Membranes and Textiles
Phone +41 58 765 76 73
agnes.psikuta@empa.ch



Publisher

Federal Laboratory for Materials Testing and Research
http://www.empa.ch

https://www.admin.ch/content/gov/en/start/documentation/media-releases.msg-id-102089.html